HAA CinemaTools with HAA Link5.11 - App Store

CinemaTools by Studio Six Digital is the professional-grade sound analysis and calibration app built for home cinema installers and enthusiasts. Whether you're setting up a Dolby Atmos system or verifying speaker performance to industry standards, CinemaTools gives you the measurement tools you need right on your iPhone or iPad.
Core Tools (included free):

Full octave and 1/3 octave RTA (real-time analyzer), precision SPL meter, and speaker polarity tester - everything you need to get started with room measurements.

HAA CinemaTools - Advanced Home Cinema Calibration
The CinemaTools module is purpose-built for HAA-certified calibrators and serious home theater professionals. Validate your system against industry-standard performance thresholds with guided calibration workflows that measure each channel's level, delay, frequency response, and more.

HAA Link - Connected Calibration

HAA Link connects CinemaTools directly to supported DSP hardware over your network. Measure, compute correction filters, and push them to your processor - all from one app. No file exports, no manual entry.

Hyperion by AudioControl Integration

CinemaTools features deep integration with AudioControl's Hyperion processor. The app's automatic biquad filter engine analyzes your room's frequency response, computes up to 14 parametric EQ filters plus shelf filters to match your target curve, and sends them directly to Hyperion via HAA Link. Measure, correct, verify - in a single workflow.

SurroundPod Support

Pair CinemaTools with Studio Six Digital's SurroundPod HDMI signal generator for Dolby Atmos test signal generation up to 9.1.6 channels. SurroundPod provides precisely calibrated test tones through your AV processor or receiver, giving CinemaTools the signals it needs for accurate multi-channel measurement and delay alignment.
Additional Modules Available:

LARSA - Loudspeaker And Room Sound Analyzer for advanced system performance analysis
SoundScope - 1/48th octave FFT analyzer with spectrograph and dual plot windows

Version History HAA CinemaTools, #1 Home Cinema test and measurement app
New in this release:
- All Hyperion units now fully unlocked
- Room setup now supports a 2-speaker front layout
- Loudspeaker editor: type values directly into any field, steppers still there
- New Active/Passive speaker setting (WIP)
- Subwoofer amp power now goes up to 10,000 W
- Filter panel now overlays phase response on the magnitude plot
- Thicker, easier-to-read FFT plot lines
- FFT now shows the other channels faded instead of hiding them while you work on one
- Added a feature in FFT Each Speaker (EQ) to allow displaying the Nearfield plot for the selected channel
- The internal generator now stays silent when an external generator is connected
- Calibration support for the latest iPhone models
- Removed all advertising and analytics tracking
- Popup menus are faster, correctly sized, and no longer clipped
- Fixed alerts and notices that could occasionally fail to appear
- Support for latest iOS versions
- Bug fixes and stability improvements 5.11 Sep 11 **HAA CinemaTools, #1 Home Cinema test and measurement app
New in this release:
- Fixed GPS coordinates not appearing in saved text files
-Bug fixes and stability improvements 5.10 Sep 3 **HAA CinemaTools, #1 Home Cinema test and measurement app
New in this release:
-Fixed the Apple TV Surround Generator not being found when connecting
-Fixed LARSA playing pink noise, or no signal, through the Apple TV generator
-LARSA no longer plays its sweep through the iPad when an external generator is driving
-More accurate generator connection status
-Bug fixes and stability improvements 5.9 Aug 11 **HAA CinemaTools, #1 Home Cinema test and measurement app
New in this release:
-Added "Add Row" button to main screen
-Fixed saving plots on the FFT Subs mdoules
-Fixed: HAA CinemaTools can now connect to Surround Generator on Apple TV.
-App version is now shown on the home screen for easier support.
HAA Hyperion Filter Panel — changes:
- Improved Hyperion HAA Link communcations
- Now allows +/-40db per channel level changes in Hyperion
- Individual filter on/off function fixed
- Hyperion is now source of truth: panel reads level/delay/polarity/filters from the unit on open, channel change, and re-show
- Writes only on explicit edit or Clear/All-Off/Import (no more bulk re-send)
- Fixed clobber: channel switch no longer re-applies stale filters or floods the command queue
- Live polling: idle panel auto-refreshes from the unit in real time
- Faster controls: Level/Delay update ~2×/sec while holding stepper
- Keyboard: full numeric keyboard (docks) instead of decimal pad — fixes the 2nd-tap QWERTY bug
- Edited filter scrolls above the keyboard
- Control Layout: freq plot to top; Level/Delay/Polarity scroll with the filters
- Filter limits match Hyperion: gain ±12 dB, Q 0–30; channel Level ±40
- Known limitation: untested on remapped-channel Hyperion (L ≠ output 1)
-Bug fixes and stability improvements 5.8 Jul 31 **HAA CinemaTools, #1 Home Cinema test and measurement app
New in this release:
-Improved in-app purchase restore on new devices
-Fixed FFT plot disappearing after changing channels
-Improved graphics processing with new Metal engine
-Fixed missing measurement tables in PDF reports
-Fixed speaker tones stacking during Polarity and SPL tests
-Improved FFT test tones for subwoofer measurements
-Fixed saved subwoofer FFT plots drawing at the wrong level
-Expanded FFT crossover point choices (80 Hz to 2 kHz)
-Initial and Final tests now both appear on RSP System FFT plots
-Multi-Channel RT/FR results now support Initial and Final measurements
-Report groups all Multi-Channel results together, with change-vs-Initial columns
-Fixed Impedance Sweep frequency scale after device rotation
-Fixed truncated dB values in SPL Pro
-Added HAA CinemaTools waterfall plot to multi-channel functions
-Added true SPL level to Multi-channel FR plot
-Bug fixes and stability improvements 5.7 Jul 14 **HAA CinemaTools, #1 Home Cinema test and measurement app
New in this release:
-Improved in-app purchase restore on new devices
-Bug fixes and stability improvements 5.6 Jun 24 **HAA CinemaTools, #1 Home Cinema test and measurement app
New in this release:
-Improved translations for many languages
-Added Early Reflections module to RP32 checklist
-Accessory Found messages now auto-disappear
-Bug fixes and stability improvements 5.5 Jun 3 **HAA CinemaTools, #1 home cinema test and measurement app
New in this release:
-Updated Chinese localizations
-Added Multi-channel Early Reflections function
-Improved calibration file detection
-Updates to CinemaTools 5.4 May 27 **Major CinemaTools Update
-Added RP32 Checklist
-Added ruler function to virtual room
-Added independent Sub offsets to normalization
-"Device not found" improvements
-Added SPL Difference tests for Screen, Surrounds, and Ceiling to match RP32
-Added discount support for Hyperion HAA Link unlock
-Fixed FFT Options to match checklist item
-Fixed LFE signal selection in FFT and LARSA Delay
-Improved reports formatting
-Added A4 report sizing if units are metric
-Added sine generator to THD module
-Added screenshot availability to Impedance Sweep and other modules
-Fixed Multi-channel RT and frequency response function breaking audio system
-Added Music Player to Tools menu, if generator supports it
-Report order now follows checklist
-Improved Hyperion authorization
-Improved SurroundPod connection
-Fixed potential SurroundPod connection issue
-Fixed USB interfaces pulling in iPad calibration files
-Fixed LARSA not allowing channel selection from Tools menu
-Fixed Tools menu functions access to all channels
-Added multi-channel Frequency Response tests linked to Multi-Channel RT60 5.3 May 15 -Updated many tools, improved checklist support
-Bug fixes and stability improvements 5.2 Apr 23 -New update with many feature additions and bug fixes 5.1 Apr 21 -Added CinemaTools and HAA Link support 5.0 Apr 9 -Bug fixes and stability improvements 4.6 12/22/2025 -Updated for new iOS devices
-Bug fixes and stability improvements 4.5 11/24/2025 -Latest bug fixes and updates 4.4 11/13/2024 -Bug fixes and stability improvements 4.3 11/03/2024 -Added VR video and photo background image display to SPL Pro
-Added option to ignore Studio Six Digital calibration database
-Added display of start of notepad text to file info page on Save/Recall
-Replaced Smaart Spectrum with in-house SoundScope VR tool with live video and photo VR with superimposed measurement data
-Removed superfluous right arrow from Save/Recall table
-Fixed bug where a custom calibration for on-device mic was not saved
-Fixed an issue with iTestMic2 compensation files not downloading in some cases
-Fixed “Rate this app” link not working
-Improved general app stability 4.2 10/28/2024 ** New in this release:
-Updated for latest iOS devices and operating system updates
-Added FFT seat-to-seat SPL option, compares to first recalled graph
-Fixed IR recording issue in 24-bit mode
-Fixed Rate this App link
-Fixed an issue with iTestMic2 compensation files not downloading in some cases 4.1 10/09/2024 -Updated for latest iOS devices and calibrations
-Bug fixes and operational improvements 4.0 07/10/2024 -Bug fixes and improvements
-Support for more iOS devices and iOS versions 3.2 07/13/2022 -Added new device calibrations
-Bug fixes for purchases 3.1 01/12/2022 -Bug fixes and stability improvements
-Updated for latest iOS and devices 3.0 09/25/2021 -Bug fixes and stability improvements
-Latest device calibrations
-Register app feature added
-Improved BlueTooth audio handling 2.9 04/10/2021 -Bug fixes and stability improvements 2.8 02/04/2021 -Bug fixes and stability improvements
-Support for more iOS versions 2.7 08/27/2020